No Red LED flashing on programming. Not able to Remote Start.

Question

Yes ignition light comes on when pressing and releasing button and tone beeps like you have door open when lights are on but still no Red flashes x 10 at programming. Blue LED light flashes about 12 times but not the Red LED. As soon as Blue LED stops flashing, I touch drivers door lock as instructed on install guide.

I am using the two Ford keys for programming.

Currently when attempting to Start by remote, I get a return message saying FAULT RESERVE.

Lock and unlock work fine.

Trunk release does not seem to activate.

Answer 1

Trunk release does not seem to activate.

Trunk release is a physical connection from the remote starter. The EVO-ALL does not control it unless the hatch unlocks when unlocking the doors.

 

As for the RED led not flashing, I would highly suggest just using the DCryptor programming. The 2-key programming procedure you are trying to do now is the same as factory key programming and requries 2 master keys (keys made at the dealer), and also the BCM needs to have spare key programming enabled (dealer option that is sometimes disabled on Ford vehicles).

 

So, if you have the Flash-Link updater, follow the 1-key Dcryptor programming. It starts on page 6/8 of the install guide: https://fortin.ca/download/32811/evo-all_fordescape2012013-2015_b20150512.pdf