Français

Questions & Answers

AX-ONE with T harness in 2014 Subaru Forester After 3X lock remote start, car engine stops when door is opened.

I nstalled an AX-ONE with the THAR-ONE-SUB1 T harness.

The car starts with the factory remote using the 3X lock feature.

The car unlocks using the factory remote, but the car engine stops and alarm goes off when the door

isopened. What are the proper set up options I need to use to be able to unlock and open the door

after being remote started?

Thanks

Jim

asked Oct 29, 2017 in Subaru by James Nagoda2 (140 points)

1 Answer

When you unlock the vehicle does the blue led on the module flash twice?

answered Oct 30, 2017 by derek g (339,870 points)

Yes, Blue LED flashes twice with single press of the unlock button on remote.

commented Oct 30, 2017 by James Nagoda2 (140 points)

it almost seems as though the evo isnt seeing the unlock command. Try turning off the alarm option 14 and re test...tell me if the alarm still goes off and vehicle shuts down.

commented Oct 30, 2017 by derek g (339,870 points)

Hi Derek,

I believe I need to use the valet switch to disable option 14? When I pressand hold the valet button I get not response at all. Goint through the connections again now to verify all were done correctly.

commented Oct 30, 2017 by James Nagoda2 (140 points)

You can do it at a computer in connection mode remote starter.

commented Oct 30, 2017 by derek g (339,870 points)

Is that the C-1 option on the list?

commented Oct 30, 2017 by James Nagoda2 (140 points)

option 14. unplug evo one, click toggle to set connection mode remote starter. go down to option 14 and set it to 14.1 then hit save options.

commented Oct 30, 2017 by derek g (339,870 points)

Thanks!,

With 14.1 enabled, I can remote start the car, but the drivers door stays unlocked.

Car does not alarm and engine stays running when door is opened.

commented Oct 30, 2017 by James Nagoda2 (140 points)

Turn off D2 in the BYPASS and re test.

commented Oct 30, 2017 by derek g (339,870 points)

Turned off D2 in BYPASS. Driver door still unlocked and stayed unlocked after remote start. I then set 6.3 in the remote start section. Car now remote starts, doors remain locked. I can unlock and enter, use key to enter driving mode.

All appears to be good.

Derek, thanks for you time and patience today. Is there anyone I can send an email

to make sure you get a pat on the back from your superiors?

Jim

commented Oct 30, 2017 by James Nagoda2 (140 points)

Ya that would be great you can email support@ifar.ca thank you.

Happy to help.

commented Oct 30, 2017 by derek g (339,870 points)

...