My Dodge Journey 2013 does not start?

Question

Hi,

 

I bought a EVO ALL Service # 001A06 692577 just to connect OEM remote starter, trigger lights and door signal (shut off engine) but it does not start my car.

 

I connected all wires as showed in electric diagram (3 times OEM remote starter) and program it under the procedure with flash link updater but when I press 3 times in the OEM remote starter, nothing happens, the trigger lights does not turn on.

 

I checked led lights and each time that I press lock or unlock in the OEM remote starter, light is blue in EVO module, also when I press button (dashboard) to start, light is yellow.

 

The problem is like the EVO module does not send signal to start engine and trigger lights or the car is not receiving it (I think so)

 

Could you help me to find the problem, please.

 

Thank you

 

Cesar

 

 

Answer 1

Are you using a t-harness? If so, then please check on how the light blue and light blue/black wires are connected from the 20 pin connector to the t-harness.

 

If you are not using a t-harness, you need to check the same thing but on top of that you have to focus on which side of the cut wire you connected the light blue/black to,

 

Thank you,

Comments

Thanks anyway !

 

When EVO ALL is updated by default the turn on engine is disabled, I corrected it, now it is working perfectly !