Nissan altima issues programming

Question

Car: Nissan Altima 2010 PTS

Device Evo-All stand alone programming

Issue: While programming the device, I am able to get to step 5 with all lights illuminated but when going 5 to 6, from accessories to turning the ignition to on, the lights never blink but rather remain solid. I have checked all wiring to verify their connection but I continue to expirence the same problem. I have tried multiple times to program the device following the program manual but to no avail.

Answer 1

The EVO does not detect ignition (on/off) on the YELLOW wire. Check Pin 8 on the OBD2 port connection to the yellow wire (A1).