2008 infiniti qx56 intelligent key wont remote start evo one with t harness

Question

Will remote start when I unlock all doors before remote or when remote is in vehicle but won't remote start when all doors are locked

Answer 1

Did the programming went as per guide ?

Comments

Yes the programming went as the guide says. I'm going to check all my connections and reprogram to see what happens. But any suggestions will help.

---

Please provide service number.

---

service number is 002b03 027076

---

I reprogrammed the unit everything went good but still won't remote start

---

Is the vehicle automatic or manual transmission?

If automatic, did you cut that yellow loop on the back of the EVO-ONE?

When you press lock or unlock, does the blue led on the evo-one flash?

---

Yes I cut the yellow loop wire and the blue led does flash when I prest the lock and unlock button

---

We control lock/arm - unlock/disarm through data.

There is an option in the EVO-ONE to enable "unlock before start" in either the remote starter side options or the bypass options. Only 1 needs to enabled. Since you're in data, option D2 in the bypass needs to be enabled. When having to wire the door locks manually, you would have to enabled the option 6.2 in the remote starter options. Luckily, we shouldn't have to wire the wires since in data.

Right now, your unit has both options enabled; 6.2 and D2. It may create a conflict so i suggest disabling option 6.2 in the remote starter options. You will need the Flash-Link to change options around.