HONDA CIVIC 2007 DOOR LOCKS

Question

THE HARNESS FOR THE DOOR LOCK WIRES IN THE MANUAL NEED TO BE HOOKED UP.

I CANT FIND IT I HAVE LOOKED AND GOT NO WHERE.

NOW THE CAR STARTS, UNLOCKS THE DOOR AND LEAVES IT OPEN.

CAN I CHANGE THE OPTIONS ONLINE? DO I NEED TO USE THE WIRE?

HOW DO I KNOW THAT I HAVE THE RIGHT FIRMWARE?

PLEASE HELP I THANK YOU.

Answer 1

The doorlock connector is pretty hard to see, it's two plugs coming from the driver door.

Comments

Ok thanks. Do they go to the back of the fuse box also?

---

most likely to the keyless or alarm module. which is harder to reach haha

Answer 2

Not sure if you've already solved your problem, but here are some pictures which might be useful to you: http://www.the12volt.com/installbay/forum_posts.asp?tid=130271

I've recently done this install, and it's a complete pain to get to the connector. It is at the back of the fusebox, but you really can't see it. You pretty much have to feel your way to it if you've got large hands, but once you unplug it you should be able to work with it.

I hope this helps. Good luck.

Comments

i found the right wires now it unlocks when but does not lock back, could it be the module gone bad?