Questions & Answers

help -remote start doesnt remotly start.

0 votes
service n#  002503-031857

2015 subaru crostrek with regular key. and eyesight.

installation done according to guide # 57211.

Also choose option C1 & D5 ., as well 38.2 to enable 3x lock to remote start.

Is there any procedure to program the OEM remote fobs to enable remote start to work.
asked Dec 5, 2016 in Subaru by felipe sesnich (160 points)

1 Answer

0 votes
Does the blue led flash on the evo when pressing lock or unlock from the factory remote?

What is the service number to the module? The one you provided is for the flash link not the evo.
answered Dec 5, 2016 by derek g (339,870 points)
NO , the blue led doessnt flash when pressing lock or unlock with the factory remote. but doors lock and unlock normally

evo service No . 00B07 139965
commented Dec 5, 2016 by felipe sesnich (160 points)
Looking at the service number its never been updated after dcryptor and you also turned off all the options. http://fortin.ca/en/support/003606005321/

 

Turn on options a1-a11 as well as c1 and 38.2

Also update the unit on the DCryptor tab.
commented Dec 5, 2016 by derek g (339,870 points)

the serv N0 above is not the one I am working on.

 

service No is 002503 031857

I turned the option a1-a11 on as well c1 and 38.2

its beed decripted and updated.

Help . still doesnt start.

commented Dec 5, 2016 by felipe sesnich (160 points)
i need the service number to the module, not the service number to the flash link
commented Dec 5, 2016 by derek g (339,870 points)

002503 031857  is it this one. if not where do I find the service number ?

thanks

commented Dec 6, 2016 by felipe sesnich (160 points)
The service number is on the back fo the module itself.
commented Dec 6, 2016 by derek g (339,870 points)
002B02 139965
commented Dec 6, 2016 by felipe sesnich (160 points)
http://fortin.ca/en/support/002b02139965/ You currently have remote starter firmware in the bypass.

- I would suggest first flashing the newest firmware to the bypass (79.39)

- followed by a master reset : http://wirecolor.com/en/qa/50193/faq-how-do-i-reset-my-evo-all?show=50193#q50193

- Followed by reprogramming it in the vehicle from start to finish including DCryptor.

- Next, I would flash the remote starter to the newest firmware version (1.21)

-Perform a master reset of the remote starter as well: http://wirecolor.com/en/qa/67178/evo-one-reset?show=67178#q67178

- Followed by enabling all necessary options in both the bypass and remote starter.

 

Once you have corrected these errors then re-test the module in the vehicle.
commented Dec 6, 2016 by derek g (339,870 points)

Related questions

...